Projects / 03 · Flight testing & troubleshooting

Bengawan UV Racing Plane

For two seasons I worked on the flight-control and ground-control side of the racing-plane team at Bengawan UV (Bengawan Unmanned Vehicles), the unmanned-vehicle team at UNS. The contribution I’m proudest of is a fix for our autonomous takeoff, which kept failing in testing and was holding up everything else the team needed to do in the air.

POSITION
Staff, Programming & Ground Control Station Division
PERIOD
Feb 2023 — Dec 2024
SYSTEMS
Pixhawk · ArduPilot · Mission Planner · telemetry
KRTI 2024
Competition lineup · 1st place national and Region 1
Fig. 1 — Two Bengawan UV racing planes on the runway. Select to enlarge.

01

Making the plane fly itself

The racing plane flies an autonomous course, so a lot rides on the flight controller. I joined the programming and ground-control division in 2023. I configured ArduPilot on the Pixhawk, planned waypoints and missions in Mission Planner, kept the telemetry link working, and prepared each flight alongside the pilots and the rest of the team.

In my second year I took on more of the division’s work: researching configuration changes, planning flight tests, setting parameters, troubleshooting at the field and helping newer teammates get up to speed.

Fig. 2 — Mission Planner replaying a recorded flight log (March 2024): telemetry on the left, the logged track on the map. A log review, not a mission being planned.
Fig. 3 — The team with an aircraft and the ground-station kit: laptop, antenna and radio transmitter.

02

A launch that kept failing

The plane is launched from a bungee launcher and then takes off autonomously. In testing, that launch failed again and again, and some of the failed launches ended in a crash. A crash usually meant the end of that day’s flying.

That was the real cost. Mission timing, waypoint navigation, pilot practice and landings all needed flying time, so all of them were stuck behind the takeoff. Most of the team’s attention was on the launcher itself, including changing or strengthening the bungee arrangement.

WAITING ON TAKEOFF
Mission timing
 
Waypoint navigation
 
Pilot training
 
Landings

03 · MY CONTRIBUTION

Looking at it from the flight controller

Takeoff wasn’t a problem anyone had handed to my division, but I wondered whether part of it could be solved in the configuration rather than the launcher. I read up on how autonomous launches are set up and settled on an approach. Instead of the motor going straight from idle to full power, the aircraft would hold a partial throttle before release, then go to full throttle as it left the launcher. The aim was to give the plane a better start in those first moments.

I made the configuration changes myself, then we tried them out together at the field.

  1. 01 · ME
    Researched an alternative

    A partial pre-launch throttle, instead of relying on launcher changes alone

  2. 02 · ME
    Configured it

    Set up the takeoff behaviour in the flight controller

  3. 03 · WITH THE TEAM
    Flight-tested it

    Launched and flew it with the pilots and the rest of the team

04

What it changed

The difference was obvious at the field: the plane started getting off the launcher reliably.

With fewer failed launches, testing days stopped ending early, and the team finally had the flying time to work on everything that had been waiting: mission timing, navigation, pilot training and landings. I don’t have the old test records to put a number on the improvement, but it was the change that let our flight development move forward again.

Fig. 4 — Three frames from a flight video, within about 2.5 seconds: the aircraft descending over the runway, passing low above it, then on the runway. The video starts with the aircraft already airborne, so no launch is shown.

05

KRTI 2024

For KRTI 2024, the Indonesian national flying-robot contest, I was one of three Bengawan UV members selected for the competition lineup, competing as Narash BUV. During the flights I watched telemetry, adjusted parameters and coordinated with the pilots.

Every takeoff we attempted at the competition succeeded. The plane didn’t crash, never lost control, stayed inside the flight area and flew without rule violations. That consistency was the product of the whole racing-plane team’s preparation: airframe, pilots, launcher and flight control together. The takeoff configuration was one of the pieces that went into it.

100%
Takeoff success across our KRTI 2024 competition attempts
0
Crashes, losses of control or flight-area violations in competition
3 of us
Selected for the competition lineup

Competition flights only, from my own recollection of the event.

Results and certificates

  • 1st place, Racing Plane — KRTI 2024 National12–19 Sep 2024 · Universitas Negeri Yogyakarta
  • Excellent Flight Award, Racing Plane — KRTI 2024 NationalSpecial award · Sep 2024
  • 1st place, Racing Plane — KRTI 2024 Region 1Aug 2024 · online round

Each certificate was issued to me by name by Balai Pengembangan Talenta Indonesia as a member of the lineup. The results themselves were won by the team.

1st place, Racing Plane division — KRTI 2024 National“JUARA 1 divisi Racing Plane” · 18 Sep 2024
Excellent Flight Award, Racing Plane division — KRTI 2024 NationalA special award (“Penghargaan Khusus … kategori Excellent Flight Award”), not a placing · 18 Sep 2024
1st place, Region 1, Racing Plane division — KRTI 2024 Regional“Juara 1 Wilayah 1 divisi Racing Plane” · team Narash BUV · 16 Aug 2024

Select a certificate to read it in full.

Fig. 5 — In the audience at KRTI 2024 with the Racing Plane first-place plaque, among other participants.